Resin floor repairs and refurbishment contractors
Ecoflor™ assesses and refurbishes worn or damaged resin flooring in commercial and industrial premises. Options include local repairs, preparation and recoating, or removal and replacement where the existing finish is unsuitable.
Peeling coatings, exposed aggregate, impact damage and worn traffic routes can have different causes. We assess the existing resin system and substrate before recommending how to restore the floor.
Send photographs, your site postcode, approximate floor area and any information about the existing resin system.
When does a resin floor need attention?
A floor may need refurbishment when wear or damage affects cleaning, appearance or day-to-day use. Typical concerns include:
- Peeling, flaking or detached coatings.
- Worn finishes and exposed aggregate.
- Local impact damage and failed patch repairs.
- Cracks continuing through the resin surface.
- Blisters or areas that sound hollow.
- Damaged coving, thresholds and junctions.
- Texture that no longer suits the operation or cleaning regime.
These signs help identify where to investigate; the appropriate repair depends on the cause.
Assessing the existing floor
We review the type and condition of the existing resin, the bond to the substrate and any evidence of contamination, moisture or movement. Previous product information and maintenance records can help establish compatibility.
Where needed, the scope may include trial preparation, adhesion checks or further substrate investigation. This helps determine whether the existing finish can support a new system or needs to be removed.
Repair and refurbishment options
Local resin floor repairs
Isolated damage may suit a local repair where the surrounding material remains sound. The defective area is removed, the substrate prepared and a compatible repair installed.
Colour, gloss and texture can differ from an aged floor. A local patch should not be assumed to become invisible.
Preparation and recoating
A sound existing resin floor may be suitable for preparation and recoating. This can restore a worn finish or form part of a planned change in colour or texture.
The new coating must be compatible with the retained system. Cleaning alone is generally insufficient preparation for a durable recoat; the required mechanical preparation and primer are defined by the selected specification.
Partial or full replacement
Detached, weak or unsuitable finishes may need removal. The replacement scope can include concrete repairs, moisture treatment where specified, levelling and a new resin system selected for current operating conditions.
Coving and junction repairs
Damage around walls, drains, doorways and equipment bases can require separate detailing. We review these areas alongside the main floor so that the refurbished system has suitable terminations and transitions.
Addressing the cause of failure
Recoating a failing floor without addressing the cause can lead to further problems. Poor adhesion, substrate weakness, contamination, moisture, movement or exposure beyond the original specification may affect the repair strategy.
For example, a kitchen floor exposed to hot washing may need a different replacement system from a dry warehouse traffic aisle. The refurbishment should reflect the conditions in service.
Managing disruption
We discuss the available closure period, floor access, equipment removal and whether work can be divided into phases. The programme needs to include preparation, repairs, application and curing.
Return times are agreed for the selected materials and intended use. Rapid-cure options can be considered where suitable, with the full programme accounting for preparation and substrate repairs as well as the final finish.
Looking after the refurbished floor
The handover should include care instructions for the installed system. Cleaning products, equipment and frequency need to suit the finish and contamination.
Routine checks around traffic routes, joints and drains can help identify local damage before it spreads. Share any changes to your process or cleaning regime when planning future maintenance.
Resin floor repair questions
Can you repair an epoxy resin floor?
Local repairs or recoating may be possible if the surrounding floor and substrate are suitable. Areas with poor adhesion or unsuitable underlying material may need removal.
Can you put new resin over an existing resin floor?
Sometimes. The existing floor must be sound and compatible with the new system, with appropriate preparation and any required primer or bond coat.
Why is my resin floor peeling?
Possible causes include inadequate preparation, poor adhesion, contamination, moisture or failure within the substrate or an earlier coating. The floor needs assessment before the repair method is selected.
Will a resin floor patch match?
A repair can be selected to approach the existing colour and texture, but ageing, wear and different application conditions can leave a visible difference. A wider recoat may be appropriate where a consistent appearance is important.
How long before the repaired floor can be used?
This depends on the repair system, preparation, temperature and intended use. Pedestrian access, vehicle traffic, washing and chemical exposure may have different return times.
Request a resin floor refurbishment quotation
Tell Ecoflor what is failing, how the floor is used and when the work needs to happen. Include photographs and any previous system specification so we can discuss repair, recoating or replacement.
Request a Quotation — 0333 1234 385 — hello@ecoflor.co.uk
