Upgrade to ChromeUpgrade to FirefoxUpgrade to Internet ExplorerUpgrade to Safari

Floor Screeding Contractors – Bedfordshire


We have floor screeding options suitable for your next project in Bedfordshire . As one of the UK’s leading specialist floor screeding contractors and we are able to service any project size and full scale commercial and industrial screeds are easily accomplished with our in-house teams.

If you are looking for a floor screed installer or floor screeding contractors in Bedfordshire , look no further than us for a competitive quotation.


Typically, there are two distinct types of floor screed – ‘traditional screed’ which is generally hand or machine finished and ‘flowing screed’ which tend to be more easily placed and finished with dapple bars as they are self smoothing.

Floor screeds tend not to be structural in the main and are used to provide a surface to apply other finishes over, bridging the difference usually between either a structural slab with a void former or insulation, over beam and block, or over underfloor heated pipework.

Screeds are often used for specific reasons:

Typically in retail and commercial applications, a screed is required in new build or shell units prior to fit out, bringing up levels from the developers base slab increasing depths up to finished floor level by around 75mm.

In industrial applications, screeds are usually installed to create falls and envelope falls on existing concrete floors where drainage and stainless steel channel drainage has been installed to allow water to run off floors.

In residential developments, screeds are installed once the main building has been made watertight and the interior build is progressing. Another reason that screed is used in residential developments is that it is a cost effective method of encapsulating and covering piped underfloor heating (UFH).

Take a look at some of the screed types we install:

Traditional Floor Screed Options

We’ve got a wide range of traditional screed for your project not limited to:

Site Batched Traditional Screeds – Bonded, Unbonded and Floating

  • Sand Cement Screed – Slow drying site batched basic screed.
  • SBR Polymer Screed – Polymer modified SBR screed suitable for laying to falls in wet environments.
  • Ultra Fast Cure Screed – Cement alternative screed with ultra fast cure times – walkable 4 hours – such as Ardex A35.

Premix Site Dropped Traditional Screeds – Bonded, Unbonded and Floating

  • Sand Cement Screed – Slow drying bulk bag delivered or loose drop.
  • Fibre Reinforced Fast Cure Screed – Reduced drying time trowel finish screed with fibres such as Tarmac Truscreed 5.
  • Ultra Fast Cure Screed – Reduced drying time trowel finish screed – such as Tarmac Retanol ideal for resin floors such as polyurethane screed flooring.

Flowing Liquid Floor Screed Options

If you are looking for a liquid screed for your project, we have a wide range of options including:

  • Flowing Cementitious Screed – Quicker drying pump applied screed like Cemfloor.
  • High Strength Cementitious Screed – C35+ pump applied screed like Cemfloor HPC.
  • Thermal Flowing Screed – Pump applied screed for UFH like Cemfloor Therm.
  • Anhydrite Flowing Screed – Lower strength flow screed like Tarmac Topflow A.

The Different Types of Bond

  • Bonded Floor Screed – Screed can be applied in thinner section than others when bonded. Bonding is usually by either epoxy, polymer or slurry bond. Typically bonded screeds are used in industrial applications where screeds have to be laid thinner at points such as drains when laid to falls. Care should be taken to ensure that surfaces are prepared properly to ensure an adequate mechanical key.
  • Unbonded Floor Screed – Screed can be applied unbonded over a 500g or 1200g membrane and is not bonded to the subfloor. Can be used in commercial environments when tenants have to hand back units stripped back to the original in dilapidations.
  • Floating Floor Screed – Screed applied over insulation or a void former. Typically applied over insulation where underfloor heating pipework is present. Always using a membrane beneath the insulation or void former, and again over before applying the screed.

The Importance of Standards – Floor Screeding Contractors

BS 8204-1 gives recommendations for the design and laying of concrete bases and cementitious levelling screeds to receive in situ floorings. It also gives recommendations for constituent materials, design, work on site, inspection and testing of concrete bases that are to receive in situ wearing screeds – see more on the British Standard for Screeds.

What To Do Next

Contact us today if you are looking to get floor screed installed. You can fill out our quick quote  form on this page to send an instant enquiry for our range of products or browse our flooring solutions above. You can also give our customer service hotline a call on 0333 1234 385 to discuss further, whatever type of floor screed you are looking for.

floor screeding contractors Bedfordshire, Floor Screeding Contractors – Bedfordshire, Ecoflor

Covering Bedfordshire

We are floor screeding contractors for all Bedfordshire areas including the main towns of: Ampthill, Bedford, Biggleswade, Dunstable, Flitwick, Kempston, Leighton Buzzard, Luton, Potton, Sandy, Stotfold and Woburn.

If you have a floor screeding requirement, call us today for a free, no obligation quotation.

About Ecoflor

Our market-leading resin floor systems can be found beneath your feet at major PLCs across the UK, making Ecoflor the first choice for many commercial and industrial clients.

If you are looking for a resin flooring system and need some guidance, give us a call. Our friendly technical staff can assist with product selection. We can also assist with site surveys and specification writing to make your next resin flooring project go smoothly.

With a full preparation and installation service, Ecoflor can complete your resin floors around your existing process while your business continues unhindered. Dust free, snag free, on time and on budget, we are The Flooring Specialists. That’s why major Plc’s choose Ecoflor time and time again.

Click on request a quote to send an instant enquiry or browse our flooring solutions above.

Discuss Your Project

Get a Quick Quote

    Request a Quote

    Request a free, no obligation quote by e-mail or give our friendly sales and technical team a call to discuss your project.

    Request a quote